Step 2) Ensure Your Xbox is Connected to Your Network If your Xbox has been previously conne. The console must be powered on for the following procedure to work properly. Just to confuse me further, there was also a MAC address listed in the wireless information (but I think that relates to the connection to the controller…). Answer (1 of 14): Step 1) Power on Your Xbox Console Press the power button on your Xbox console and make sure it powers on. Once I’d gone through the initial setup (unfortunately I had to complete that before I could access the dashboard), I could examine the network settings in the system blade but, strangely, the MAC address I needed was labelled as the wired MAC address, even though it’s on the Wi-Fi connection (See solution 7 in Microsoft knowledge base article 978945). Adding a new MAC address to the Wi-Fi access point is simple enough – except that I had a few problems finding the MAC address for my Xbox 360s. Unfortunately, I didn’t get the chance to set it up until quite late at night and it took me a while to connect to my home Wi-Fi network, even using the Windows Connect feature, because I use MAC address filtering (in addition to WPA2 encyption). Select Advanced, and then press the A button.
On the Connect Status screen, select Settings, and then press the A button. Note Do not use any address that begins with the digits '44.' Turn off the Xbox console, and then turn it back on. Enter this information in the Xbox console. My new Xbox 360 S (with Kinect sensor) arrived today and I’m very excited. Your computers MAC Address is listed under Physical Address.
